#135T: Polymer Release Agent
Product Code : # 135T
船牌 #135T 半永久性脱模剂

A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions.It is specially designed for:
一种具有高热稳定性的聚合物脱模剂。它含有的聚合物能多次优质脱模,和保护模具免受固化反应时高温放热产生的伤害。该产品特别适合于:
Accelerated Exothermic Resins up to 400º F or 204º C
高达400ºF或204ºC的加速放热树脂。
Multiple Releases
多次脱模。
Compression Molding
模压成型脱模。
Vacuum Bagging
真空成型脱模。
Resin Transfer Molding (RTM)
RTM成型脱模。
NOTE: For best results, use terry cloth or Turkish towels when applying #135T. Apply in a circular motion to mold by overlapping previous area. Work product in thoroughly over the mold creating a thin even coat. Check for uniform coverage. Allow it to dry. Reapply as directed.
注意:为了获得最佳效果,使用毛巾或棉布浸润#135T脱模剂。以圆周运动方式擦拭在模具上,并在同一区域多次擦拭。彻底在模具上形成一层薄的均匀的保护层。检查是否已均匀覆盖整个模具。再让它挥发干燥。并按此指示重新多次实施。
#135T may be sprayed. When applying, if sprayed, we suggest wiping it lightly over sprayed film for uniform coverage.
#135T脱模剂可喷涂在模具表面。如果采用喷涂方式,应在喷涂后轻轻擦拭,以均匀覆盖整个模具。
|